Modesto Water Heater Maintenance in 10 Minutes

Posted by on Feb 25, 2014 in Water Heater Repair Modesto

We are going to put you to work today, but only for about 10 minutes. Yep, that’s all it will take for these 2 important water heater upkeep tasks; however, Water Heater Repair Modesto¬†understands they will do an outstanding task of assisting with 3 things:
Having your water heater last as long as possible (that will conserve you cash).
Making sure the water heater runs securely (we do not want it to blow up).
Having it run as energy efficiently as possible (likewise conserving you money).

So with that in mind, are you prepared to invest 10 minutes once or two times a year to assist conserve some cash? Water Heater Repair Modesto CA thought so.

Testing the T&P Relief Valve

Frequently called the T&P Valve, or the temperature and pressure relief valve, has an essential job. It helps see to it excess pressure does not build up inside the water storage tank, or in even more easy terms, it makes sure the water heater does not explode. As the picture reveals, it has a lever or little deal with on it. All you have to do is raise it part method and then let go of it. Ideally, it snapped back to its shut position rapidly. If it is working effectively, a little water can be heard going into the drain pipe below the lever you just lifted and you possibly heard some pressure being released. If none of these things have actually happened during the test, the valve will require to be replaced.

Perform a Mimi Water Heater Tank Flush

By nature, rust and corrosion will take place inside the water storage tank thanks to the chemical reactions taking place with all the parts inside that are needed to heat up the water. We will not get overly technical here, but it is simple to help avoid this from happening by doing a flush or draining of all or a portion of the water in the storage tank.

For just a mini flush, position a pail under the drain valve below the tank. Open the drain valve and fill the pail with water. Drain at least a few gallons of water in all. Let the water sit in the pail for a few minutes to settle and examine if there is much that settles to the bottom of the pail. If there is, if the water heater has actually not been drained for a very long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible. You will desire to turn the temperature dial down and may wish to let the water cool down for about an hour first so it is not too hot while draining it. Also, it would be easier to attach a hose to the drain valve and let the water go outside rather of using buckets.

If the water looks reasonably clean and clear from the small test you should be all set. When the water heater has a large quantity of sediment inside of it, it can make loud popping noises and it reduces its effectiveness too.

Though water heaters are fairly upkeep free and not challenging to operate, any time you feel the tiniest uneasy or are not sure of exactly what to do, it is always best to have a plumbing professional assist with the situation.

Water Heater Repair Modesto